Imants model guide
Description of Imants Spader Models:
This Imants model guide is made to be a general overview of the spader models manufactured by Imants. When choosing a spading machine the following are some things to keep in mind:
- These machines are relatively heavy and all of the weight is extended out behind the hitch, so the lifting capacity of your tractor is usually the limiting factor for what model machine you can use.
- The horsepower ratings listed below are “engine horsepower” not “PTO horsepower”.
32 Series:L or light duty model, works down to 12”, available only in 4 foot working width. This model is intended for tractors under 25 hp and for working greenhouse or garden-type soils (no rocks or heavy clay). Average working speed 0.5mph, operates on 540PTO, delivered with or without power harrow.
27 Series:Designed for compact tractors in the 30-70 hp range, available in 4, 5, or 6 ft working widths. Comes standard with power harrow and operates on 540 PTO. These spaders have a working speed of up to 2kph (1.2mph) @ 10-12” and can work down to a maximum of 14”. They are most suited for operations such as CSA’s, small organic growers, orchards, vineyards, market gardens, etc.
33 Series:Works down to 14”, available in 7ft & 8ft working widths. Comes standard with power harrow and operates on 540 PTO. Requires tractor in the 65-85hp range, with a working speed of up to 2.5 kph (1.5mph). These models are most suited for medium-sized growers.
40 Series:Working depth down to 20”, two available working widths of 5 and 8 ft. These models are most suitable for tree farms, fruit & vegetable growers, and perennial crops where deeper soil tillage is desired. Requires an average of 12-15hp per working foot and 540 or 1000 PTO, depending on model. Creeper gear, hydrostatic, or vario transmission required unless working only to medium depths (10-12”) and/or in lighter soil. Working speed range 0.2mph to 1.6mph.
HIGHER-SPEED “REVOLUTION” SPADERS:(Do not require slower gearing/ground speeds)
38 Series:This model replaced the 37 series with a newer frame design and upgraded drive train. Designed for tractors in the 100-150 hp range, available in 10 ft working width only. Comes standard with power harrow and operates on 1000 PTO. These spaders have an average working speed of 2.5mph @ 10-12” and are intended for medium-sized growers. The 38 series model will work approximately 2.5 acres per hour.